Tuesday, July 30, 2019

Ways to Stabilize a Video (aka, "Gary Friedman has Too Many Cameras")


Image stabilization for video is different than image stabilization for stills.  That’s because the nature of the shake to be corrected is different.  For video, the correction has to last longer and the shakiness may very well be more intense (like when you’re walking and shooting video at the same time, for example.)

That’s why most modern digital cameras have a different, more aggressive system for correcting video shake.  In addition to whatever optical stabilization the camera offers, the more aggressive way takes advantage of the fact that the number of pixels in a video (even a 4K video) is far smaller than the number of pixels the sensor has.  So the camera might shoot a little wider than what you see in the viewfinder, and the camera compares adjacent video frames, aligns them (much like it does in HDR mode), and crops off the rest before merging it into the video stream.  All in real time.  The more you oversample (capture pixels outside of the intended frame), the more leeway you have for fixing a shaky hand.

I was reminded of this when I shot a very informal video giving a tour of my studio.  Here it is, shot using an RX100 V and a small tripod-socket-based handle (mechanically similar to the VCT-SGR1  recently announced by Sony with their RX100 III vlogging bundle,)  For this, the more intense "Intelligent Active" SteadyShot feature for movies was enabled:



As you can see, the shakiness of my hand often exceeded what the camera’s made-for-movies steadyshot could do.  It bugged me a lot, but when I posted it to my youtube channel, only one person complained.  (On the other hand, this is Youtube, where even the worst production values raises the average.)

Is there anything I can do in post-processing to smooth this out?

I tried several different solutions:

The first was the Warp Stabilizer smoothing function in Adobe Premier.  For this example I decided NOT to have the program crop the excess black, so you can see the process of the overlapping-and-aligning-adjacent-frames technique in action: it will leave an animated black border.  If this border were to later be cropped away, it would result in a slightly-zoomed-in final product.  The amount of zooming-in would depend entirely on just how badly your original video was shaking.  Here, have a look:



Here’s what the free video stabilizer from Google Photos does:



Notice the unintended artifacts: as the software lines up adjacent frames (and cropping off the excess), it distorts the background in eerie and nausea-inducing ways.  Who among us would have predicted that?

I tried a few others.  Magix Vegas comes with a free plug-in called "Vegas Stabilize" that always crashes no matter what you feed it.  And Sony offers a free video stabilization product called Movie Edit Add-On that only runs on your phone and only works on video it thinks was taken with the RX0 II.  (I didn’t have time to try to spoof it.  Maybe one of you can try it and report back.)

Probably the best post-processing result I got was a plug-in (stand-alone also) called Mercalli from ProDAD GmbH:



Let’s be clear: If you really want smooth motion video, there’s only one way to get it: using a steadycam or gimbal device.  There are a bazillion of them on the market; the most popular ones for the RX100 series seems to be the Pilotfly C45 for $349 and also the Zhiyun Crane M, which seems to be discontinued (and the current versions look to be needlessly large).

So, given that gimbals are the only truly effective method of eliminating camera shake when shooting handheld video, why don't I own one?  Good question.  Probably because I don't consider myself to be a videographer.  I don't think like a director does - telling the story with a sequence of different shots not unlike how a graphic novel presents its story - and with the exception of my assignment in Vietnam last December, I rarely have a client that requires video as a deliverable.  (Also, well, I have too much stuff... :-) )

In the Pipeline

Spanish A7 III now released!
French A7 III on the way!

Of course there will be books on the A7R IV and RX100 VII.  (New layouts, too!)  Let me know if you'd like to be on the waiting list for either of these books.

Upcoming Seminars

My decade-long quest to teach getting "Wow!" images to anyone with a camera in a fun and uniquely intuitive way continues.  Email me (Gary at Friedman Archives dot com) if you're interested in attending any of these:

Santa Ana, California – August 10-11, 2019
Copenhagen  September 14-15, 2019
Indio, California Jan 11-12, 2020
Kiawah Island, South Carolina  April, 2020
St. Louis, MO  May 30-31, 2020

How do these locations get chosen?  Photo clubs in the area request them!  Have your local photo club contact me regarding being a guest speaker for FREE!

A Personal Note

I wish to thank everyone who cared enough to express their condolences after reading about my mom’s passing in last month’s blog.  It's heartening to have received so much support from readers all over the world!  It made a difference.  Thank you.


Until next time…
Yours truly, Gary Friedman

22 comments:

  1. Thanks for sharing your blogs and keeping us up to date. Always interesting.

    ReplyDelete
  2. I quite often use PIPP to stabilize astro-video. Works very nicely, at least for astrophotography.

    Enjoy your blogs and thoughts

    ReplyDelete
  3. At the moment I am editing some old and newly digitalized color footage shot half a century ago in Indonesia. I use the built-in stabilizer in Final Cut Pro X, which does a good job. As the digital copy was made in 1920-1080 format (just in case some information or stuff had to be added in the borders) and the original film was shot in about the size 4:3 there is a black border left and right, so the stabilizer works in this case as an enlarger and instead of getting a shifting black border within 4:3 it has this shifting border in the 1920-1080 format. With some cropping left and right the 4:3 format can be kept, filling the whole 4:3 format, though with an enlargement of the image.

    ReplyDelete
    Replies
    1. Yes, any of the post-processing to stabilize a video will leave the animated black border which must be cropped away afterward, resulting in "an enlargement of the image".

      Delete
  4. Am in the queue to purchase the Sony A7R IV. Since I'm a fan of your A7R III publication, would love it if you do one on the IV.

    ReplyDelete
  5. Hi Gary
    I use the DeShaker plugin for VirtualDub. It works very well and gives an enormous amount of options and flexibility in how it is applied. It is a bit on the geeky side but the documentation does a good job of explaining all the options.
    You can fine tune it to the nth degree - something you can't do with most other software stabilisers.
    Its also free - worth a look.

    Cheers,
    Neil

    ReplyDelete
    Replies
    1. Thanks for the heads-up! Can't beat 'capable' and 'free'. :-)

      Delete
  6. Amazing collection Gary, I just feel I need more. What do you think about the new A7RIV and the 200-600, 600prime?

    ReplyDelete
    Replies
    1. What do I think of them? I think they are amazing pieces of engineering.

      Delete
  7. I am waiting for the RX100 VII to be released and would be interested in that book when you have it ready.

    ReplyDelete
  8. I’m waiting for the RX100 VII and would be interested in that book when you have that ready.

    ReplyDelete
  9. I have a Snoppa Atom. As well as my iPhone, It will also work with my RX100!

    ReplyDelete
  10. Thanks yet again Gary,
    Please give me some warning before showing the google photos edited versions again... I need to overdose on travel-calm first 😜

    Sti looking forward to the video on the HP-41xx and HP-71B to go with your book.. I really regret selling the CMT eprom burner and bag of eproms now.
    But I need the HP-41 Translator pack before I buy another hp-71b.
    Thanks again

    ReplyDelete
  11. Thanks yet again Gary,
    Please give me some warning before showing the google photos edited versions again... I need to overdose on travel-calm first 😜

    Sti looking forward to the video on the HP-41xx and HP-71B to go with your book.. I really regret selling the CMT eprom burner and bag of eproms now.
    But I need the HP-41 Translator pack before I buy another hp-71b.
    Thanks again

    ReplyDelete
    Replies
    1. For those who are wondering what he's talking about, my very first book was on those two Hewlett Packard Calculators:

      http://friedmanarchives.com/~download/temp/Control_the_world_with_HP-IL.pdf

      A video about those calculators would last hours. Even my book (which discussed both hardware and software projects) just scratched the surface! BTW my PPC ROM manual still sits proudly on my bookshelf.

      Delete
  12. The Minolta Maxxium 9000; I had the full accessory kit, well used and exclusively for 25+ years. We'll never see the likes of that great camera ever again !

    ReplyDelete
  13. The Minolta Maxxium 9000; I had the full accessory kit, well used and exclusively for 25+ years. We'll never see the likes of that great camera ever again !

    ReplyDelete
  14. Pretty amazing video Gary.I always wondered how you could stabilize video in post, better to get it right while shooting. Thanks for showing.

    ReplyDelete
  15. Please but me on the list for the A7R IV book.

    ReplyDelete
    Replies
    1. I would but I'd need your email address or something. :-)

      Delete
  16. Gary Friedman has too many cameras. This had me laughing for a while. But the tuorial was great. TFS!

    ReplyDelete
  17. Hey Gary,
    Thanks for keeping us updated with free but effective video stabilizer software. You've shown several practical ways to prompt up and make it effective one's videos quality . Grateful to you for sharing such kinds of insightful information with us. Request to keep it on.

    ReplyDelete

Thank you for your comment! All comments must be approved by a moderator before they will appear.